Premier Wireless Sensors
Temperature Sensor
The DecentLab Temperature Sensor is a LoRaWAN®-enabled sensor used for outdoor remote monitoring, cold chain, storage, building automation, smart agriculture and open water or tank temperature.
Learn more
Water Leak IP67
The Leak Detector can be placed near bathrooms, washing machines, and other appliances or fixtures and will keep an eye out for water leaks. It can detect as little as three drops of water. The Leak Detector will notify the user on sensing water and the Valve Controller (sold separately) will automatically shut off water to prevent further damage. Three separate set of sensors, the Bottom (Main) Sensors, the Drip Tray, and the Remote Sensor Probe (optional), act together to monitor any appliance or fixture for leaks.
Learn more
Electric Sub-Meter
The SQUID can simply and easily sub-meter your single-phase or three-phase electrical installation. Installed in an electrical panel, the SQUID’S 12 clamps allow you to sub-meter your installation fully, without decommissioning or modification. The SQUID is compatible with several different clamp sizes from 10mm to 36mm in diameter, with max currents ranging from 60A to 600A (sold separately).
Learn more
BOB Assistant Predictive Maintenance Sensor
The Bob Assistant predictive maintenance sensor by eolane learns quickly and well! It applies analysis algorithms embedded in the sensor to understand and monitor all of your equipment. Zero infra, zero wiring, zero configuration. To install Bob, simply place it on your equipment. Bob works independently for several years.
Learn more
Field Test Device
The Field Test Device has an Immediate viewing of network coverage data with Geolocation of measuring points. It is a benchmark product widely praised by public network operators.
Learn more
ELT Lite Wireless Transceiver
This device helps many cities become smarter and in control of their surroundings. The ELT Lite is enclosed in an IP67 box and is designed to be mounted outside or in extreme conditions. You can use the ELT Lite together with an external sensor of your choice to build your own solution.
Learn more
Yabby Compact GPS Tracker
The Yabby is a compact, rugged GPS tracking device that has been designed for tracking assets where a small device is required, such as on animals, livestock, packages, bags, bicycles and other assets. The IP67 rated housing is rugged and UV stable, so the Yabby can be mounted on assets that are exposed to rain, dust and outdoor conditions.
Learn more
LoRa Spy T3 Extreme Low Temper Recorder
The long-range wireless data logger LoRa SPY T3 measures and records ultra-low temperature thanks to an external probe. Designed to monitor low temperature in ultra-low freezers and LN2 tanks, the LoRa® SPY T3 can be placed on the outside thanks to its magnet allowing to visualize data measurement. Includes a PT100 stainless steel probe, Cl. A, Ø3x20 mm with 3m teflon/teflon cable Ø2,9mm (-200 +0°C).
Learn more
Wireless Turbidity Sensor
The RA0710 is integrated with a turbidity sensor (ZS-206) that is designed and manufactured using the principle of scattered light turbidity measurement. The LoRa module of the RA0710 communicates with the turbidity sensor in the form of RS485 communication to obtain the current turbidity signal value and sends it through a wireless gateway.
Learn more
Water Leak Sensor
The Dragino LWL01 is a LoRaWAN Water Leak Sensor. It detects the water leak status and send it to LoRaWAN network. LWL01 is powered by a CR2032 coin battery, in a good LoRaWAN Network Coverage case, it can transmit as many as 12,000 uplink packets (base on SF7, 14dB). in poor LoRaWAN network coverage, it can transmit ~ 1,300 uplink packets (base on SF10, 18dB). The design goal for one battery is up to 2 years. User can easily change the CR2032 battery for reuse.
Learn more
Thermocouple Temp Sensor
This Radio Bridge thermocouple temperature sensor can be configured via downlink messages. Temperature reporting can be based on thresholds, report-on-change, and periodic messaging. Versions of the sensor support the major LPWAN standards such as Sigfox, LoRa/LoRaWAN, and NBIoT.
Learn more
Analog or Digital Sensor (Switch)
The device DL-DLR2 is a multi-purpose LoRaWAN® sensor reader and transmitter manufactured by Decentlab. It can be configured by the manufacturer for a variety of sensor models. For example, DLDLR2 can be configured to read a pressure sensor through the integrated RS-485 interface; or a temperature / humidity sensor through the integrated I2C interface; or an ultrasonic rangefinder through the integrated serial (UART) interface. It can also be configured to read analog voltage or current signals (0 … 3 V, 4 … 20 mA, etc.).
Learn more
Smart-Kill Electronic Rat Trap
When you’re dealing with a rodent problem, there’s plenty of frustrations to deal with – remembering to constantly check your traps shouldn’t be one of them. With the Victor Smart-Kill Electronic Rat Trap, you can get updates from your trap no matter where you are! This innovative Wi-Fi-enabled trap pairs with an app on your smartphone or other mobile device and sends a notification to alert you of a catch, letting you know when it’s time to empty the trap without having to check.
Learn more
Agriculture Sensor Surface Mount
The Agriculture Surface Mount Sensor is is the ideal solution to streamline and simplify the collection of key soil and environmental metrics for crops, residential and commercial lawns and gardens and golf courses . The device provides a straightforward and easy to deploy solution for soil moisture and temperature, air temperature and humidity, and outdoor light monitoring. Enjoy increased crop yields and decreased operating expenses with the deployment of this versatile device.
Learn more
Vehicle Counting Sensor
The PlacePod Vehicle Counting sensor provides accurate, real-time vehicle counts for parking facilities and lots. PlacePod VC can be used in combination with PlacePod Vehicle Detection sensors to manage occupancy for individual spaces, such as spaces designated for people with disabilities and spaces with electric vehicle charging stations.
Learn more
Ambiance PIR T,H Sensor
The AMBIANCE sensor integrates into a single product all the functions necessary for the analysis of environmental and behavioral data: Humidity / Luminosity / Presence / Temperature
Learn more
External UV Sensor
This Polysense device utilizes an external UV Sensor to determine the severity of UV in its vicinity. It can help determine if any action needs to be taken to decrease UV exposure if necessary.
Learn more
Temp+Humidity+AirPressure+NO2 Smart Node
The Polysense WxS 8700 is a wireless gas sensing platform based on LoRa technology operating at license free spectrum (ISM), enabling both public and private IoT network deployments by service providers, municipality governments, enterprises. It’s deployed in star topology with very high density, particularly suited for industrial and enterprise IoT applications such as: Industrial campus safety, Smart and Safety, Environmental Monitoring, Subway security and safety, Hospitality safety and Residential complex, shopping center, CBD safety
Learn more
PlacePod In-Ground Vehicle Detection
PlacePod is an IoT-enabled smart parking sensor for on-street and off-street public and private parking management. PlacePod solves the most mission-critical aspects of parking management: accurate, real-time vehicle detection and the location of available parking spaces. The PlacePod sensor is a LPWAN-compatible vehicle detection device. It is built with PNI’s high-performance magnetic sensor and vehicle detection algorithms that accurately detect the presence or absence of a vehicle in a parking space. Each sensor has a unique ID for easy provisioning, tracking and management.
Learn more
Flow Meter
Robeau is the first smart connected flow meter that effectively displays your direct water consumption per water point The flow data is transmitted directly to the customer’s mobile, tablet and computer, or it can be accessed on the product’s small built-in screen with alerts about water usage and possible leaks transmitted in real time. By accurately monitoring your water usage, one can not only modify habits to be more environmentally responsible but also save 20 to 40 percent on your water bill!
Learn more
Smoke and Heat Dectector Sensor
The LS-134 is an M2M/IoT station that is LoRaWAN™ compliant for smoke and heat detectors that save lives by LoRa® every day. These small but effective devices are a vital fire safety early warning system, in both the workplace and the home.
Learn more
Waterproof LoRa Sensor Node v2
LSN50v2 is a Long Range LoRaWAN Sensor Node. It is designed for outdoor use and powered by Li/SOCl2 battery for long term use, power consumption and secure data transmission.It is designed to facilitate developers to rapidly deploy industrial level LoRaWAN and IoT solutions. LSN50 v2 helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
Learn more
Submersible Water Level Sensor (3m)
EM500-SWL level sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It is designed to provide convenience of direct submergence in liquids for up to 200m reliable level measurement.
Learn more
LoRa Spy T2 Incubator Temperature Recorder
The LoRa® SPY T2 measures and records temperature thanks to an external probe. Designed to monitor thermo-controlled chambers, the LoRa® SPY T2 can be fixed outside thanks to its magnet allowing to visualize data measurement. With the PT100 moulded probe CL.A, Ø5x20mm with 30cm Sentoprene flat cable (-50 +105°C),
Learn more
Temperature Smart Node Sensor
This Polysense device is an industrial temperature smart node sensor. It has a durable IP67 enclosure.
Learn more
Wireless 2-Input Push Button Interface
The Wireless 2-Input Push Button Interfaceallows a notification signal to be sent when connected push button is pushed. When someone is in danger and needs emergency assistance, press the emergency push button device; R718T2 immediately sends an alarm message to the gateway.
Learn more
BLE Beacon
The beacon constantly broadcasts iBeacon information according to settings. It has built-in high-capacity button cell. The broadcasting interval is 500ms. The maximum standby time is approximately 6 years. The beacon is mainly used for indoor tracking. It can also be attached to assets and therefore used for asset tracking with the help of our Bluetooth gateways
Learn more
Temperature Monitoring
Automated Temperature Compliance Monitoring
Learn more
Dry Contact Interface
Netvox wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via APP when the contacts touch or a switch is triggered.
Learn more
Soil Moisture
Skysens SkyAGR1 is cost-effective, easy to use soil moisture and temperature monitoring solution. It has long battery life, extendable temperature probe and water resistant.
Learn more
Ethernet Gateway
The Rising HF RHF2S024 is an indoor Ethernet Gateway designed specifically for small private networks. It is normally installed in an office or computer cabinet. Power for the Gateway comes from a 12V mains plug-pack. An onboard WiFi module provides a connection to the local computer network.
Learn more
Smart-Kill Electronic Mouse Trap
When you’re dealing with a rodent problem, there’s plenty of frustrations to deal with – remembering to constantly check your traps shouldn’t be one of them. With the Victor Smart-Kill Electronic Mouse Trap, you can get updates from your trap no matter where you are! This innovative Wi-Fi-enabled trap pairs with an app on your smartphone or other mobile device and sends a notification to alert you of a catch, letting you know when it’s time to empty the trap without having to check.
Learn more
Elsys ERS CO2 Sensor
The Elsys ERS CO2 is a LoRaWAN room sensor that measures indoor environment. ERS CO2 is enclosed in an room sensor box and is designed to be wall mounted. Inside the ERS CO2 you will find five sensors: Temperature sensor, humidity sensor, light sensor, CO2 sensor and a motion sensor (PIR). The ERS CO2 is powered by two 3,6V AA lithium battery.
Learn more
Outdoor Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. The Armored Sensor™ IP67 weather-proof enclosure makes the sensor suitable for outdoor and industrial use. An indoor / smart building version is also available for low cost applications.
Learn more
Magnetic Door Sensor
NETOP MAGNETIC DOOR Sensor is a long range wireless sensor which can be used for opened/closed situations that provide information on the status of doors, windows, cabinets, etc. This sensor is fully compatible with LoRaWAN technology.
Learn more
Industrial Temperature Sensor (-50~200°C)
EM500-PT100 resistance temperature sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It offers excellent accuracy over a wide temperature range from -200°C to 800°C to suit most applications
Learn more
Activity Event Counter (R718MBB)
The device detects the number of movements or vibrations (such as detecting the motor a few times a day), the maximum number of movements or vibrations can reach 232 times (theoretical value), and sends the information of the number of movements or vibrations to the gateway for processing. Apply SX1276 wireless communication module.
Learn more
Decentlab Tipping Bucket Rain Gauge
This LoRaWAN®-enabled tipping bucket rain gauge is a precipitation and weather monitoring system that meets the specifications of the World Meteorological Organization (WMO). The accumulated precipitation is very useful for reporting the amount of rain water over long periods. Moreover, the accumulated precipitation allows to calculate precipitation even for periods when no data could be transmitted to the network.
Learn more
Wireless 3-phase current meter (R718N370)
The NETVOX wireless three-phase current detector is used to detect three-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
Learn more
enLink Air-X LoRa Wireless Air Quality Monitor
enLink Air-X wireless Air Quality Monitor is a precision instrument which accurately measures up to 14 key environmental paramters including Temperature, Humidity, Oxygen, Carbon Dioxide, Carbon Monoxide, VOC’s, Ozone, Particulate Matter, Light Level and many more. Real-time readings are transmitted to the cloud using long range LoRa wireless where the data can be visualised and analysed. Air-X is designed for outdoor monitoring solutions.
Learn more
Indoor Water Leak Sensor
The wireless water leak sensor uses a water probe to detect the presence of water or other liquids. When the presence of water or another liquid is detected, an alert is sent over the wireless network.
Learn more
Infrared Thermometer/Surface Temperature Sensor
The infrared thermometer (pyrometer) allows remote surface temperature measurements. The sensor measures the thermal energy radiated by the target. Applications include: Outdoor remote monitoring, Road surface monitoring, Ice warning, Smart agriculture, Temperature control in manufacturing.
Learn more
BLE Probe
LW003-B is a LoRaWAN®-Based probe integrating LoRaWAN®-Based and Bluetooth wireless communication, LW003-B can scan BLE Beacon data and send data to LoRaWAN®-Based gateway, and then upload to server, so as to realize environmental monitoring and indoor positioning.
Learn more
SensorData LoRaWAN
The SensorData is a battery-powered data communicator that interfaces to a range of sensors, GPS, inputs and outputs, and uploads data via a LoRaWAN network. Great for agriculture and remote sensor monitoring applications.
Learn more
Condition Monitoring Sensor
WISE-2410 is a LoRaWAN wireless condition monitoring sensor integrated with an ARM Cortex-M4 processor, LoRa transceiver, 3-axis accelerometer and temperature sensor. It balances the wireless bandwidth between WISE-2410 and the gateway, so it also mitigates the data transmission fail rates between edge-devices and gateways. ISO 10816-3 compliant
Learn more
LoRa Spy Digital
The LoRa® SPY Digital is designed to monitor temperature in cold room and any under-controlled equipment and also for temperature and humidity in warehouse. It can only be used with external removable JRI temperature digital probes which have an internal memory storing their calibration adjustment coefficients and other metrological data. (probes available separately)
Learn more
LoRaWAN Datalogger
Ursalink UC1122 is designed as a cost-effective industrial machine monitoring device that monitors and controls up to 1 DC signal, 1 drivable relay output and 2 analog inputs. UC1122 supports standard LoRaWAN class C protocol, which is perfectly used as a remote data logger or a remote I/O controller.
Learn more
L-SPYUNIVE
The LoRa® SPY U recorder is designed to measure and record data coming from the following types of analog sensors: PT100, current (4-20 mA / 0-20mA), voltage (0-1V), counting or dry contact. (no probe included)
Learn more
Thermocouple Interface (R730CK2)
R718CK2 (nickel-chromium-nickel silicon thermocouple): its use temperature is -40 ~ +375℃, with good linearity, large thermoelectromotive force, high sensitivity, stability, can not be used directly at high temperature for sulfur, reducing or reducing It is not recommended for use in weak oxidizing atmospheres in oxidizing alternating atmospheres and in vacuum.
Learn more
LoRa Spy T2 Freezer Temp Recorder (3m)
The LoRa® SPY T2 measures and records temperature thanks to an external probe. Designed to monitor thermo-controlled chambers, the LoRa® SPY T2 can be fixed outside thanks to its magnet allowing to visualize data measurement. With the PT100 moulded probe CL.A, Ø5x20mm with 3m Sentoprene flat cable (-50 +105°C).
Learn more
Indoor Window & Door Sensor
Netvox’s wireless door/window sensor utilizes a magnetic switch to detect when a door or window is opened. Ideal for areas where access needs to be monitored, the wireless sensor sends an alert message to a centralised monitoring system via the LoRaWAN protocol when a window or door is opened.
Learn more
Temperature and Humidity
Ewattch’s Temperature, Humidity, Luminosity, and Motion Sensor is a multi-functional LoRaWan sensor that measures a variety of environmental data including presence or motion detection, with a presence detection range of 5 meters. This sensor model also offers the option of CO2 level monitoring.
Learn more
Panic Button
LW004 series is a LoRaWAN®-Based network IoT button specifically designed for both indoor and outdoor tracker objects. It is compact, mini and easy to use. LW004-PB is a panic button that will send position information to the server when it is triggered until the alert is stopped. It can be used in case of an emergency for personal safety and alert notifications.
Learn more
Differential Pressure Sensor for Gas
Ellenex’s Gas Differential Pressure Sensor with built-in temperature sensor is compatible with all air and other non-conductive and non-corrosive media. This low-power LoRaWAN™ sensor covers a wide range of outdoor applications.
Learn more
KONA Smart Room Sensor (Base Sensor)
The KONA Smart Room Sensor, BASE Model, integrates practical functionality into a very small form factor. The Smart Room Sensor is an ideal solution for holistically monitoring the home and office environment. The device is capable of measuring and reporting temperature, humidity, light, movement, shock, detecting leaks, open / closed doors and windows. It also supports battery status updates for easy maintenance.
Learn more
Waterproof LoRa Sensor Node
LSN50 is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by Li/SOCl2 battery for long term use.It is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
Learn more
Decentlab Total Solar Radiation Sensor
This LoRaWAN-enabled solar radiation sensor allows for accurate data collection at a wide range. This device can be used for outdoor monitoring, solar panel arrays, smart agriculture, and building automation.
Learn more
Oyster Rugged GPS Tracker
The Oyster2 is a rugged, waterproof, cellular GPS tracking device designed for tracking non-powered, exposed assets where super-long battery life is essential.
Learn more
Soil Water Potential and Temperature Sensor
The LoRaWAN-enabled soil water potential sensor including temperature sensor is an easy to use device with Low salt sensitivity. This device can be used in an outdoor environment that allows for irrigation control and monitoring of parks and golf courses.
Learn more
H2 iBeacon
The H2 beacon is one of your best choices for indoor navigation tracking solutions. It is based on a 2.4GHZ design, and boasts a waterproof level of IP67. In addition to broadcasting its own MAC address, the H2 beacon also broadcasts the strength of the Bluetooth signal, which is RSSI information.
Learn more
Indoor Temperature & Humidity Sensor
Netvox’s wireless indoor air temperature and humidity sensor collects and transmits readings to give accurate measurements and monitor any changes in environment. The wireless sensor sends the alert messages to a centralized monitoring system via the LoRaWAN protocol at pre-programmed intervals.
Learn more
Siren
R602A is an intelligent wireless alarm that can communicate with other devices through wireless network. It has high-power speakers and high-brightness LEDs for sound and light alarms.
Learn more
AC Current Meter
Our LoRaWAN Polysense AC Current Meter is an instrument that converts the primary side large current into the secondary side small current according to the principle of electromagnetic induction. The current transformer consists of a closed core and a winding.
Learn more
Cold Room Temperature Sensor
TEKTELIC’s Cold Room Temperature Sensor is the ideal solution for maintaining optimal and consistent temperatures within cold rooms and refrigerated areas. Applications include food and pharmaceutical storage, where safeguarding the integrity, quality, and safety of products is vital. The device can be implemented within cold storage such as fridges, coolers, cold rooms and even freezers with minimal impact on battery life or radio signal strength
Learn more
Probeless Temperature Sensor
The wireless no-probe temperature sensor measures ambient temperature without any external devices such as a thermocouple or thermistor. If the temperature rises above or falls below the configured thresholds, an alert is sent over the wireless network. Versions of the sensor support the major LPWAN standards such as Sigfox, LoRa/LoRaWAN, and SubGig.
Learn more
Door Window Open/Close Sensor
The Tabs Door & Window sensor fits into any interior design and is easy to install. It is composed of two parts. The main body contains the active electronics to measure magnetic fields and transmit data ,if any changes, to a LoRaWAN network. The other part is a permanent magnet of sufficient field strength to be detected by the Hall-Effect sensor on the main body.
Learn more
CTD10 High-precision Pressure/liquid Level, Temperature A...
The device DL-CTD10 enables remote monitoring of water level, temperature and electrical conductivity. Applications are water quality monitoring in open water, fill level of tanks, groundwater quality and level and various other applications.
Learn more
G62 GPS Tracker
The G62 is a rugged, compact and waterproof GPS tracking device with IO. The electronics, backup battery and antennas are all located within the tough nylon-glass housing, offering the ability to track any asset in the most demanding conditions using public or private LoRaWAN networks.
Learn more
LoRa Spy T2 Freezer Temperature Recorder
The LoRa® SPY T2 measures and records temperature thanks to an external probe. Designed to monitor thermo-controlled chambers, the LoRa® SPY T2 can be fixed outside thanks to its magnet allowing to visualize data measurement. With the PT100 moulded probe CL.A, Ø5x20mm with 30cm Sentoprene flat cable (-50 +105°C)
Learn more
Mouse Trap
Xignal detects the status of the mouse trap: armed, unarmed or unarmed with catch. A big advantage for professional use is the room that Xignal creates for intensive and efficient inspections. This saves costs. The non-tox digital trapping fits in with integrated pest management.
Learn more
Water Rope Leak Detector
Netvox’s wireless water leak detector with rope sensor detects the presence of water if any portion of the rope becomes wet. The status data is sent to the data centre via the LoRaWAN protocol at pre-programmed intervals in addition to the signal being sent when a leak is detected.
Learn more
Industrial Temperature Sensor (-200~50°C)
EM500-PT100 resistance temperature sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It offers excellent accuracy over a wide temperature range from -200°C to 800°C to suit most applications
Learn more
2-Button Satisfaction Terminal
A simple 2 push button terminal that monitors in real time the average level of satisfaction, generates alerts when satisfaction is falling and records corrective actions taken by your agents. Collect information about your users and monitor the improvement in satisfaction and in your interventions’ performance. The solution allows you to collect valuable data such as the time required for each intervention, their duration or the impact on satisfaction.
Learn more
Soil Moisture
RA0713 can be used to detect soil temperature and humidity (connected to 5TE sensor) or soil moisture (connected to EC-5 sensor).
Learn more
IMBUILDINGS People Counter
The IMBUILDINGS People Counter is a battery powered sensor for counting people crossing a horizontal line. The counter consists of two parts, an infrared (IR) transmitter part and an infrared receiver part, which always work together. The IR transmitter the infrared signal. The IR receiver is the main part and holds the intelligence and communication with the outside world.
Learn more
VOC Sensor
This device reads temperature, humidity, pressure, light intensity and air quality (expressed as IAQ or bVOC value) and sends collected data over the LoRaWAN™ network. Ideally suited for a wide range of applications such as building automation, condition monitoring, predictive maintenance, security, healthcare and many more use cases.
Learn more
Smoke Detector
AN-102 is an intelligent wireless light inductance smoke fire detector based on LoRaWAN protocol. Based on independent smoke alarm, it has been added functions of wireless communication and wireless networking, so the smoke fire detector has the features of high sensitivity, stable and reliable, attractive and durable, easy to deploy and easy to use. The smoke fire alarm mainly uses the infrared scattering principle to detect fires. When there is smoke dust enter the smoke alarm, because of scattering, which can enhance the receiving tube signal, and when smoke dust reaches the threshold, the smoke alarm will emit alarm sound, and meanwhile the indicator light will flash quickly, providing an fire early notification. The alarm information is reported to the Cloud in real time, which can replace a traditional smoke alarm that reports information through a wire.
Learn more
Door/Window Sensor
The wireless door/window sensor uses a magnetic hall effect sensor to detect open/close events for doors and windows. When an open or close event is detected, an alert is sent over the wireless network.
Learn more
Indoor Air Quality and Environmental Sensor
This Skysense Environmental Sensor is used for measuring Indoor Air Quality, Barometric Pressure, Temperature and Humidity for indoor spaces.
Learn more
GPS Smart Tracker
This is a 4G GPS tracker that includes a front-facing SOS button and call function. The user can receive and make phone calls when in distress. It also has a BLE function in development. Currently supports only AT&T sim cards.
Learn more
LoRaWan Tracker
The LT-100 is a LoRaWAN™ compliant RF Tracker which includes Asia’s first LoRaWAN™ certified module by GlobalSat. It is designed for asset tracking, pet tracking, and personal monitoring of children and elderly. It has a built-in Help button for emergency report which allows immediate notification to an assigned individual. It is also equipped with a high capacity battery which avoids the need of frequent charging.
Learn more
GPS Tracking Sensor
Skysens SkyTag1 is a smart tag capable of broadcasting GPS and GNSS locations via the LoRaWAN network which enables location tracking around 5m accuracy depending on the GPS availability. Easy integration with other platforms. Cost-effective, compact, water resistant (not IP67). Smart tracking algorithm with accelerometer.
Learn more
EMS Indoor Environment Sensor
The EMS includes internal sensors for measuring indoor temperature, humidity, acceleration, a water leak detector, and a reed switch (a magnet for reed switch is included). This is a LoRaWAN room sensor for measuring the indoor environment, the number of openings on a door, or maybe if something has moved or not. It also has a water leak detector which makes it ideal to mount under a dishwasher, for example. With its small size and minimalist design, it is perfect for mounting on door frames, window panes, or any other limited surface area. If you need a discrete looking sensor with a broad scope of applications.
Learn more
Indoor Temperature , Humidity Sensor
Lansitec temperature and humidity sensor is designed based on the advanced LoRa modulation and powered by lithium battery with 5-year operation time. It offers a cost-effective LoRaWAN end device for a variety of applications. Its IP65 enclosure and long operation time offer the benefit of low maintenance cost. Therefore, it is ideal for outdoor use. Sensor operation mode can be adjusted via LoRa network.
Learn more
Smart Waste Bin Sensor
The Dingtek Smart Waste Bin Detector sensor is designed for waste bin (trash bin) status detection. It detects full/empty, flame risk, inclined (fall) or not and etc. With LoRaWAN module, it transmits the status via gateway to networks server and application server. User can monitor the status remotely. With the application software, user can assign the collector resource work plan and route plan. Analyze task performance and find out solution to improve. Finally the objective of high efficiency , good environment, and low cost are achieved. As it is with algorithm of low power consumption, the internal battery can work for more than 5 years (at 4 hours interval upload intervals).
Learn more
Contact Sensor
The wireless dry contact sensor detects a connection between two wires. When the wires are either shorted or opened, an alert is sent over the wireless network. Versions of the sensor support the major LPWAN standards such as Sigfox, LoRa/LoRaWAN, and SubGig.
Learn more
Soil Moisture, Temperature, and Electrical Conductivity S...
EM500-SMT provides an external probe for receiving accurate and instantaneous information on soil moisture content, temperature, and salinity, it is an important tool for anyone involved with soil.
Learn more
Soil Moisture
The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture. It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity. It also has been calibrated in factory for Mineral soil type. The LoRa wireless technology used in LSE01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.
Learn more
Smart Plug
This Class-C device can be used to monitor common appliances such as refrigerators, dishwashers, etc to see the power on/off status, current, energy and voltage. This is a smart plug that needs to be plugged into the wall.
Learn more
Industrial Temperature Sensor (-50~500°C)
EM500-PT100 resistance temperature sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It offers excellent accuracy over a wide temperature range from -200°C to 800°C to suit most applications
Learn more
Temperature and Humidity
Optimize occupant comfort and energy performance in a building. Functions: temperature, humidity, alert button, dry contact input. Monitor the temperature and humidity of a room containing sensitive equipment
Learn more
LoRa Spy TH1 Temperature and Hygrometry Recorder
The LoRa® SPY TH1 recorder measures, records temperature, and hygrometry. The LoRa® SPY TH1 is particularly adapted for HVAC applications. Equipped with an ambient temperature and humidity probe (-30 +70°C / 0-100%RH).
Learn more
Environmental Sensor
The RAK7204 is a LPWAN node with integrated environmental sensors. The high-precision environmental sensors, can measure changes in temperature, humidity, gas pressure and provide an indoor air quality index. All the accumulated data can be send to a Gateway in order for it to be forwarded to the Cloud.
Learn more
Temperature & Humidity Sensor
RisingHF temperature and humidity sensor offers cost effective LoRaWAN end node solution for a variety of applications. Its reliable and low power design allows a battery operation up to 5 years without any maintenance. IP64 enclosure concept and water splash proof unique sensor design are ideal for outdoor use and installation in low accessibility locations.Sensor acquisition rate could be adjusted via LoRaWAN Class A downlink capability and permit to manage the battery life or the measurements capacity according to the needs of the application. Rising HF sensors family is fully compatible and plug & play for LoRaWAN network operation.
Learn more
Indoor Water Leak Sensor
Netvox R311W Is A Water Leak Sensor Based On LoRaWAN™ Protocol (ClassA) Carrying Leak Detection And Alarm Function. When Z311W Detects A Leak, It Will Send An Alarm Message To The Gateway. When The Sensor Detects No Leak, It Will Send A Message That Reports The Status To The Gateway. There Are Two Water Leak Sensors Which Allow Users To Monitor Two Spots
Learn more
2-Gang Vibration Sensor Rolling Ball Type
When the vibration sensor moves or vibrates, the R718DA2 can detect vibrations or moving signals and transmit the detected data to other devices through the wireless network.
Learn more
Armored Dry Contact Sensor/Bridge
The two-wire dry contact sensor detects a connection between two wires. The Armored Sensor™ IP67 weather-proof enclosure makes the sensor suitable for outdoor and industrial use.
Learn more
2-Input Dry Contact Interface
Netvox wireless 2-Input dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via APP when the contacts touch or a switch is triggered.
Learn more
Temperature and Humidity Sensor w/ Probe
Skysens SkyCld1 is a cost-effective, easy-to-use temperature and humidity Monitoring device designed for variable application in different areas. IP65 Casing optional.
Learn more
Decentlab Eleven Parameter Weather Station
This LoRaWAN® -enabled all-in-one weather station is packed with sensors like solar radiation, precipitation, air temperature, relative humidity, internal temperature, vapor pressure, barometric pressure, wind speed and direction, maximum wind speed, tilt sensor, lightning strike count and average lightning distance. It is accurate at low wind speeds because no moving parts will cause friction or fail. This device is designed for continuous deployment in harsh climates as its integrated spring acts as a rain gauge filter to keep out large particles.
Learn more
Temperature/Humidity Sensor
The Dragino LHT65 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in SHT20 Temperature & Humidity sensor and has an external sensor connector to connect to external sensors such as Temperature Sensor, Soil Moisture Sensor, Tilting Sensor etc.
Learn more
Light Sensor (R311G)
Netvox’s wireless light sensor is used for the detection of ambient light intensity. It can work in conjunction with other devices to perform wireless dimming functions. The wireless communication is sent via LoRaWAN protocol at pre-arranged intervals.
Learn more
Decentlab Air Quality Station
This is the Decentlab Air Quality Station that is capable of utilizing 4 different gas sensors at one time. It is compatible with NO2, NO, CO, H2S, O3+NO2, and SO2 sensors.
Learn more
Rat Trap
Xignal detects the status of the rat trap: armed, unarmed or unarmed with catch. A big advantage for professional use is the room that Xignal creates for intensive and efficient inspections. This saves costs. The non-tox digital trapping fits in with integrated pest management.
Learn more
Wanesy Wave Beacon
Wanesy Wave is an anchor that combines Wi-Fi and BLE (for Bluetooth Low Energy) tracking technologies and LoRaWAN backhauling to create highly reliable and secured smart retail, smart assets monitoring and smart indoor tracking solutions. Wanesy Wave is designed to answer hospitals, buildings or industrial site managers or mall operators that critically need real-time information on their assets position or people counting information.
Learn more
Decentlab Wind Speed, Wind Direction, and Temperature Sensor
This LoRaWAN® -enabled ultrasonic anemometer measures wind speed, wind direction, maximum wind speed, air temperature and tilt. It is accurate at low wind speeds because no moving parts will cause friction or fail. This device is designed for continuous deployment in harsh climates.
Learn more
Aqua Mod Sensor - Internal Antenna
AquaMod ' is a tight, autonomous wireless module allowing to collect the data measured by the digital sensors physico-chemical DIGISENS of the brand Ponsel. Simple to install and preconfigured in factory, the AquaMod’ module is immediately operational.
Learn more
1-channel GPIO Transceiver
ELT Lite is a general LoRaWAN® device for measuring analog or digital signals. It is a 1-channel GPIO wireless transceiver and can also provide power to external sensors. ELT Lite is enclosed in an IP67 box and are designed to be mounted outside. It is the ideal sensor for measuring in advanced places or extreme weather conditions. ELT Lite has the capacity of measuring with remarkably long range.
Learn more
SensorNode LoRaWAN
The SensorNode is a battery-powered data communicator that interfaces to a range of sensors, GPS, inputs and outputs, and uploads data via LoRaWAN Low Power Wide Area Networks (LPWANs). Great for agriculture and remote sensor monitoring applications.
Learn more
AC Current Meter
The INTENS’O SENSOR measures the magnitude of the electrical current flowing in the AC power supply of any equipment. The sensor is used to determine the equipment status according to one or more configurable current thresholds. Data is transmitted over a public or private LoRaWANTM radio network.
Learn more
Temperatur and Humidity Sensor
The Moko Temperature and Humidity Sensor is used for measuring indoor and outdoor environments. It adopts dedicated digital module acquisition technology and temperature and humidity sensing technology to ensure high reliability and long-term stability of products. LW002-TH could be applied to any type of environment, and ideally suited for a wide range of applications such as Intelligent agriculture, urban monitoring, air quality, industrial, environmental or farming projects.
Learn more
Predictive Maintenance
Plug-and-play predictive maintenance solution ensures uptime and reduces costs
Learn more
2-Gang Thermocouple Sensor -High Temperature
This equipment is used to detect temperature of the object and medium which thermocouple is contacted. It can be connected to two thermocouples for testing.
Learn more
Push Button and Tracker
The GlobalSat LT-501 standard series is a RF Network tracker specifically designed for both indoor and outdoor monitoring on objects. It is compact, light, and easy to use. The device is also equipped with the rechargeable battery to provide basic power usage.
Learn more
Industrial Temperature Sensor (-50~800°C)
EM500-PT100 resistance temperature sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It offers excellent accuracy over a wide temperature range from -200°C to 800°C to suit most applications
Learn more
Kona Industrial Transceiver and Sensor
The KONA Industrial Transceiver and Sensor is an ideal solution for interfacing automation and control instrumentation to LoRaWAN® networks. The Industrial Transceiver and Sensor supports up to 3 Analog and Digital inputs enabling remote capture of data, 2 Switched Outputs to activate actuators and different control system components and a configurable RS-232, RS-422 or RS-485 interface with numerous protocols. It also measures and reports temperature, humidity, or other custom features.
Learn more
8911 Vibration Sensor
The TE model 8911 wireless accelerometer combines a sensor, data collector, digital signal processor, and radio into one compact, battery-operated device that measures both vibration and temperature data. The model 8911 wireless accelerometer uses the LoRaWAN communication protocol, offering a simple, reliable and secure means of expanding condition-based maintenance into plant areas where the cost to install wired systems is prohibitive, making data available to existing process control and information systems. The model 8911 incorporates a piezo-electric accelerometer which offers a wide bandwidth to >10kHz, outstanding measurement resolution and superior long-term stability compared to design using MEMS solutions. The 8911 contains digital signal processing that provides an FFT analysis of the vibration being sensed. The output data describes the center frequency, peak value, bandwidth, and percent of the total spectral content for the eight most significant acceleration peaks in the vibration signal. Because of this feature, the 8911 directly provides the data most needed to plot trends and monitor changes in the performance and condition of factory machinery.
Learn more
Occupancy and Environmental Sensor
The Elsys ERS Eye is a sensor for measuring occupancy and the indoor environment. ERS Eye is designed to be mounted on the ceiling and senses when somebody is using the room (standing/sitting). It can be used for dynamic workplace management, facility management and workplace statistics. The sensor also measures temperature, humidity and light. ERS Eye is powered by two 3,6V AA lithium battery. Product Features: Panasonic Grid-Eye infrared sensor, temperature sensor, humidity sensor, light sensor, motion detection sensor (PIR).
Learn more
Ultrasonic Level Sensor
The ultrasonic level sensor provides high accuracy ultrasonic proximity detection and ranging in air. The Armored Sensor™ IP67 weather-proof enclosure makes the sensor suitable for outdoor and industrial use.
Learn more
BLE LoRa Sensor Beacon
The VX-BLS Beacon is a low energy, inexpensive solution for asset tracking, monitoring, and controlling. Due to its many different configurations and software settings, the BLS can quickly be setup to work in a variety of applications. The BLS utilizes BLE and LoRa wireless technologies with the capacities for reading and controlling many different sensors such as but not limited to: magnetic field (hall effect), optical proximity, orientation, vibration, CO2/VOC gas, humidity, temperature, and GPS.
Learn more
LoRa TEMP Temperature Indicator
The LoRa® TEMP indicator measures the temperature using its internal probe. Particularly suitable for retail and catering, it allows to automate the temperature monitoring in cold chambers and save the goods in case of malfunction.
Learn more
Temperature and Humidity Sensor
The sensor measures the ambient temperature and relative humidity in buildings, apartments, houses. It transmits the data via a public or private LoRaWAN™ radiofrequency network.
Learn more
KONA Smart Room Sensor (PIR Sensor)
The KONA Smart Room Sensor, PIR Model, integrates practical functionality into a very small form factor. The Smart Room Sensor is an ideal solution for holistically monitoring the home and office environment. The device is capable of measuring and reporting temperature, humidity, light, movement, motion, open / closed doors and windows. It also supports battery status updates for easy maintenance.
Learn more
ELT Ultrasonic Sensor
The ELT Ultrasonic is designed for measuring the distance. It can be placed in various environments and can work as a bin level sensor, tank level sensor, or water level under bridges, for example. Not only can you measure distance with the ELT Ultrasonic, but it also has four internal sensors: temperature sensor, humidity sensor, accelerometer, and an atmospheric pressure sensor. It is enclosed in an IP67 box which makes it ideal for mounting outside or in extreme conditions.
Learn more
enLink Air LoRa Wireless Air Quality Monitor
The enLink Air LoRa wireless Air Quality Monitor is a precision instrument which accurately measures up to 14 key environmental parameters including Temperature, Humidity, Light Level, VOC’s, Carbon Dioxide, Particulate Matter (PM2.5 & PM10), Oxygen, Sound Level, Barometric Pressure, plus up to 4 plug-in calibrated gas sensors from a range of over 200 gases / sensitivities. Real-time readings are transmitted to the cloud using long range LoRa wireless, where the data can be visualised and analysed.
Learn more
Indoor Ambiance Monitor
Decentlab’s indoor ambiance monitor continuously measures carbon dioxide (CO2) concentration, volatile organic compounds (VOC), temperature, humidity, barometric pressure, ambient light and motion / presence. These data allow to quantify the air quality, temperature and illumination (ambiance) in offices, class rooms, hospitals, stores or malls. These data also indicate the presence of people and how they move in a room. This allows to efficiently control heating, ventilation, air conditioning (HVAC) and illumination corresponding to the actual situation in a specific room.
Learn more
ELT 2 Wireless Transceiver
The ELT-2 have the capability of solving almost any problem. It is enclosed in an IP67 box which makes it ideal for mounting outside or in extreme conditions. The ELT-2 can measure both analog or digital signals and can handle up to two external sensors simultaneously. Not only can you connect external sensors to the ELT-2, but it also has four internal sensors: temperature sensor, humidity sensor, accelerometer, and an atmospheric pressure sensor.
Learn more
Ultrasonic Distance/Level Sensor (0.5~10m)
EM500-UDL ultrasonic level sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It can measure the distance to a wide range of objects by using ultrasonic sound waves and provides highly accurate continuous level measurement of most liquid material.
Learn more
High-Precision Pressure/Liquid Level and Temperature Sens...
The device DL-PR36 enables remote monitoring of water level in open water, fill level of tanks, groundwater level and various other applications. It measures the pressure at the sensor head relative to the pressure at the cable end (device enclosure). When the sensor head is placed under water (or any other liquid), the relative pressure indicates the depth of the sensor head.
Learn more
3-Button Satisfaction Terminal
A simple 3 push button terminal that monitors in real time the average level of satisfaction, generates alerts when satisfaction is falling and records corrective actions taken by your agents. Collect information about your users and monitor the improvement in satisfaction and in your interventions’ performance. The solution allows you to collect valuable data such as the time required for each intervention, their duration or the impact on satisfaction.
Learn more
Modbus to LoRaWAN converter
Featuring 2 serial inputs and 1 alarm input & relay output, UC1152 supports standard LoRaWAN class C protocol, which is perfectly used as a remote data logger or a remote I/O controller.
Learn more
LoRa Spy T2 Incubator Temp Recorder (3m)
The LoRa® SPY T2 measures and records temperature thanks to an external probe. Designed to monitor thermo-controlled chambers, the LoRa® SPY T2 can be fixed outside thanks to its magnet allowing to visualize data measurement. With PT100 moulded probe CL.A, Ø5x20mm with 3m Sentoprene flat cable (-50 +105°C) for incubator.
Learn more
External Magnetic Switch Sensor
Monitor the open/closed status of manholes, vaults, cabinet, doors, and more.
Learn more
GPS Smart Watch
The LW-360HR is a wearable with BLE/ GPS/ LoRa® functions. Small groups can keep contact with each other easier in a wide range of active areas based on GPS satellite positioning and LoRa® 's long-distance transmission technology (Up to 10+ KM)
Learn more
LT33222-L IO Controller
The Dragino LT series I/O Modules are Long Range LoRa I/O Controller. It contains different I/O Interfaces such as: analog current Input, analog voltage input, relay output, digital input and digital output etc. The LT I/O Modules are designed to simplify the installation of I/O monitoring.
Learn more
Compact Tracker
The Abeeway Compact Tracker is a highly versatile multi-node tracker with embedded sensors combining GPS, Low-power GPS, Wi-Fi Sniffer, BLE and LoRaWAN TDoA geolocation technologies, supporting accurate outdoor & indoor geolocation.
Learn more
Industrial Temperature & Humidity Sensor with Probe
The Ideetron industrial temperature and relative humidity sensor can be used for a variety of applications and comes equipped with a temperature probe. Its IP67 enclosure is waterproof, making it ideal for walk-in refrigerators and freezers.
Learn more
Cellular Gateway
The KONA Micro IoT Gateway was built for enterprise and lightweight industrial applications that require Always On connectivity for their IoT solutions. Configured with an internal 3G/4G modem and a built-in four hour battery backup the gateway continues to provide service even when main site has gone off-line due to a power outage.
Learn more
Badge Bluetooth Gateway
Lansitec badge Bluetooth gateway is based on Bluetooth 5.0 technology and LoRaWAN. It receives nearby Bluetooth beacon messages and transmits them to the server through LoRa. The built-in 600mAh rechargeable battery makes it last about 10 hours when not powered. The standby time can be significantly prolonged by changing Bluetooth receiving setting. For more specific information, please refer to the data sheet and battery life estimation spreadsheet. The gateway is portable and suitable for the following use cases: • Asset and personnel management in schools, office buildings, and hospitals • Cars and keys tracking in large parking lots
Learn more
Wireless Activity Timer
The device detects the duration of the movement or vibration (timekeeping) and sends the duration or timing information of the movement or vibration to the gateway for processing. The duration of the movement or vibration can be up to 1000 hours (theoretical value). SX1276 wireless communication module.
Learn more
Non Contact Liquid Level Sensor
The Dragino LDDS20 is a LoRaWAN Ultrasonic liquid level sensor for Internet of Things solution. It uses non contact method to measure the height of liquid in a container without opening the container, and send the value via LoRaWAN network to IoT Server. The LDDS20 sensor is installed directly below the container to detect the height of the liquid level. The non contact measurement makes the measurement safety, easier and possible for some strict situations.
Learn more
Multi-Functional Sensor Data Collection Box
The AN-201A Sensor Box is a wireless data gathering device, complied with LoRaWAN. It has been integrated with multiple communication ports to a variety of sensors. Its high-gain omnidirectional external antenna expands the communication distance. With battery capacity Up to 19000mAh, it enables a long lifespan, reduces cost of battery replacement. It has a rugged enclosure with IP67 waterproof. It can be fixed by pole-mounted and wall-mounted method, installed on pole, internal and external walls of the building, roof and etc.
Learn more
Submersible Water Level Sensor (5m)
EM500-SWL level sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It is designed to provide convenience of direct submergence in liquids for up to 200m reliable level measurement.
Learn more
People Counter Vector 4D
The Irisys Vector 4D AI is the most advanced people counter in the world with 100% count accuracy. Impressive features such as passive staff detection, dwell time measuring and the ability to connect multiple units to cover wide openings enable this IoT device to help smart businesses go beyond people counting and optimize the customer experience. And it does all this anonymously, protecting customer and staff privacy!
Learn more
IoT Pressure Sensor
Low Power Pressure Transmitter for Liquid and Gas Media. Applications include monitoring for: pump performance, water pipeline pressure, pressurized systems, chiller and cooling systems, hydraulic and pneumatic systems, liquid storage level, spraying systems and air compressors.
Learn more
2-Input 0-10V ADC Sampling Interface
The device is designed for a variety of resistive bridge-sensing applications like pressure, temperature, and level-sensing applications. It can also support other applications, weight scale and force-sensing applications that use strain gauge load cells, and other general resistive bridge signal-conditioning applications.
Learn more
Acceleration Based Movement Sensor
The wireless acceleration-based movement sensor uses an internal accelerometer to detect movement of an asset. When motion is detected that exceeds a certain threshold, an alert is sent over the wireless network.
Learn more
PH Monitoring Sensor
This Polysense device is a PH Monitoring sensor that has a waterproof seal, small size, and can be used outdoors. Up to 5km reach in NLoS (Non-Line-of-Sight) and up to 18km LoS (Line-of-Sight) environments.
Learn more
2-Gang Reed Switch Open/Close Detection Sensor (R718F2)
R718F2 Is A 2-Gang Open/Close Detection Sensor That Utilizes 2 Reed Switches To Detect Whether Two Objects Are Separated Or Not. An Example Of R718F2’S Application Is To Detect The State Of A Door Or Window For Security Purposes. It Is Based On SX1276 Wireless Communication Module, And The Communication Is Fully Compatible With LoRaWAN™ Protocol (Class A).
Learn more
LoRaWan BLE Gateway
Lansitec Indoor Bluetooth gateway is based on Bluetooth 5.0 technology and LoRaWAN. It receives nearby Bluetooth beacon messages and transmits them to the server through LoRa.
Learn more
Temperature Probe Sensor
Laird’s Sentrius RS1xx Series is a battery powered, long range integrated sensor platform leveraging the benefits of LoRaWAN and Bluetooth Low Energy (BLE) connectivity. Its small, rugged form factor contains superior RF performance and flexibility with precise temperature and humidity sensors, and room for future expansions. At its core, the RS1xx series utilizes Laird’s field-proven and reliable RM1xx module hardware, providing LoRaWAN options in 868 and 915MHz frequencies, plus BLE for local ndata display, configuration and troubleshooting. Based on the Semtech SX1272 and Nordic nRF51 silicon, it offers a LoRa range up to 10 miles with a local 2.4 GHz connectivity option to smartphones and tablets. The RS1xx Series works with Laird’s SentriusTM RG1xx Series of LoRa / multi-wireless ngateways for simple out-of-the-box integration, and is compatible with 3rd party Cloud and LoRa network necosystem partners.
Learn more
Dendrometer-US
This outdoor dendrometer measures swelling and shrinkage of stems, branches or roots with a sub-micrometer resolution. Its Carbon fiber (CFK) frame combined with stainless steel elements allows for superior long-term and temperature stability.
Learn more
LoRaWAN Button
RAK612 LPWAN Button is a remote wireless trigger based on the LoRaWAN® protocol. It supports user-defined functions for each key. It is easy to link to the Cloud as it is myDevices Cayenne certified.
Learn more
Aqua Mod Sensor - External Antenna
AquaMod ' is a tight, autonomous wireless module allowing to collect the data measured by the digital sensors physico-chemical DIGISENS of the brand Ponsel. Simple to install and preconfigured in factory, the AquaMod’ module is immediately operational.
Learn more
Indoor Temperature , Humidity Sensor
NETOP Temperature & Humidity Sensor is a long range wireless sensor which can be used both for measuring temperature and humidity. This sensor is fully compatible with LoRaWAN technology.
Learn more
Ambiance Monitoring Sensor AM102
The AM102 is a compact indoor ambiance monitoring sensor including motion, humidity, temperature, light, TVOC, CO2, and barometric pressure sensors. The AM102 is a battery powered device and is designed to be wall-mounted. It is equipped with NFC (Near Field Communication). Sensor data are transmitted in real-time using standard LoRaWAN protocol. LoRaWAN enables encrypted radio transmissions over long distance while consuming very little power.
Learn more
Multiservices Buttons
Smilio A - Multiservices is a system of 5 connected buttons that enable real-time interaction with your audiences. Associated with an explaining POS material, this survey terminal provides valuable insights into quality of your services or equipments.
Learn more
Temperature & Humidity Sensor
Laird’s Sentrius RS1xx Series is a battery powered, long range integrated sensor platform leveraging the benefits of LoRaWAN and Bluetooth Low Energy (BLE) connectivity. Its small, rugged form factor contains superior RF performance and flexibility with precise temperature and humidity sensors, and room for future expansions. At its core, the RS1xx series utilizes Laird’s field-proven and reliable RM1xx module hardware, providing LoRaWAN options in 868 and 915MHz frequencies, plus BLE for local data display, configuration and troubleshooting. Based on the Semtech SX1272 and Nordic nRF51 silicon, it offers a LoRa range up to 10 miles with a local 2.4 GHz connectivity option to smartphones and tablets. The RS1xx Series works with Laird’s SentriusTM RG1xx Series of LoRa / multi-wireless gateways for simple out-of-the-box integration, and is compatible with 3rd party Cloud and LoRa network ecosystem partners.
Learn more
GPS Tracker with 9-axis Accelerometer
The Dragino LoRaWAN GPS Tracker LGT-92 is an open source GPS tracker base on Ultra Low Power STM32L072 MCU and SX1276/1278 LoRa Module. LGT-92 includes a low power GPS module L70 and 9-axis accelerometer for motion and attitude detection. The power for both of the GPS module and accelerometer can be controlled by MCU to achieve the best energy profile for different applications
Learn more
Soil Moisture, Temperature and Electrical Conductivity Se...
A LoRaWAN enabled soil moisture sensor including temperature and electrical conductivity sensing, volumetric water content (VWC) measurement with high volume of influence: 1010 mL. A cable 5 m. in length is included. Simply place and measure, no setup is required. Provides unattended real-time monitoring for several years without replacing batteries. Has a robust polycarbonate enclosure that is weatherproof, impact and UV-resistant (IP67). Powered by standard alkaline (C-type) batteries.
Learn more
Light Sensor (R718G)
The device has a built-in light sensor that can be used for ambient light intensity detection. The R718G detects the ambient light intensity value and adds it to the gateway
Learn more
enLink Status-L Leak Sensor
enLink Status-L detects the presence of water leaks, flooding and condensation using a water detection cable. Leakage or moisture is detected over the entire length of the cable, various cable lengths are available to facilitate leakage sensing over a wide area. When a leak is detected, a message is transmitted using long range LoRa wireless to generate an alarm so early action can be taken. (comes with 1 metre detection rope plus 0.5m leader)
Learn more
Submersible Tank Level Sensor
Low Power Submersible Level Sensor with Built-in Temperature Sensor. Applications include: water tank, fuel tank, ISO tank, waste water and oil/waster oil tank level monitoring.
Learn more
Extreme Temperature PT100 Probe Sensor
This Polysense device is an extreme temperature probe PT-100. It has a temperature range of -100-300℃.
Learn more
PM2.5 Sensor
RA0716 with temperature and humidity sensor, can detect and send the temperature and humidity data of the environment, is a wireless communication method, in line with the LoRa protocol standard. RA0716 with PM2.5 dust sensor can be used to obtain the concentration of suspended particulates in air per unit volume.
Learn more
Microtracker Button
The Abeeway Micro Tracker is a multi-mode tracker with embedded sensors combining GPS, Low-power GPS, Wi-Fi Sniffer, BLE and LoRaWAN TDoA geolocation technologies, for accurate outdoor and indoor geolocation. It is versatile and multi-purpose. With its small size and long battery life, it is the ideal product for numerous tracking applications: things of value, people or pets.
Learn more
Power Outlet
The Smart AC Outlet is an ideal solution for Smart Home and Office automation. The outlet gives users the ability to automatically trigger a 120VAC, 60Hz switch over a LoRaWAN network, allowing for cost savings from improved power consumption practices and enhanced home and office safety and security. One of the two outlets on the device is equipped with a LoRaWAN switch, allowing for flexible and versatile use.
Learn more
Toilet Water Monitoring
24/7 Remote Usage Monitoring and Leak Alerts for Your Properties
Learn more
CO + Fire smoke Sensor
This Polysense device is a well integrated CO sensor + smoke sensor +lora rf. This sensor can only be used indoors. Both CO sensors and fire smoke can detect tobacco burning.
Learn more
2-Gang Reed Switch Open/Close Detection Sensor (R311CC)
The R311CC device is equipped with two external reed switches, which can be used for door and window switch state detection. The built-in wireless module can realize wireless alarm and other functions, and is compatible with the LoRaWAN protocol.
Learn more
Ultrasonic Distance/Level Sensor
The device enables remote monitoring of water level, fill level of tanks and silos, fill level of waste containers, presence of objects or snow level. It measures the distance between the sensor head and the target (rangefinder). The measurement principle is based on ultrasonic waves which are transmitted by the sensor and reflected back from nearby objects. Using the time of flight of the sound waves and the speed of sound (temperature compensated), the sensor computes the traveling distance and thus the distance to the object.
Learn more
Strain/Weight Sensor
The DecentLab Strain/Weight Sensor is LoRaWAN®-enabled sensor based on vibrating wire technology. It can be used for: outdoor remote monitoring, silo fill level, structural health monitoring, weighing, cracks monitoring and component deformation/strain monitoring.
Learn more
Decentlab Photosynthetically Active Radiation Sensor
This LoRaWAN-enabled Photosynthetically active radiation sensor allows for accurate data collection at a wide range. This device can be used for Outdoor remote monitoring, Plant canopies in outdoor environments, Smart agriculture, Greenhouses, and Growth chambers.
Learn more
Indoor Environment Monitoring Sensor
ERS is a smart and professional LoRaWAN® sensor for indoor climate measurements. It has a clean and modern design which makes it discrete in both business and home environments. ERS can measure temperature, humidity, light, and room activity. The sensor is highly configurable, and the user can change all parameters as they like. ERS works great as a sensor for smart building, dynamic workspaces, or climate control.
Learn more
Activity Event Counter (R311FB)
The device detects the number of movements or vibrations (such as detecting the motor a few times a day), the maximum number of movements or vibrations can reach 232 times (theoretical value), and sends the information of the number of movements or vibrations to the gateway for processing
Learn more
Tank Level Sensor
This is a heavy duty industrial tank level sensor with an on/off switch. It sits on top of a tank into the gauge and measures the level at regular intervals.
Learn more
enLink Modbus Bridge
enLink Modbus instantly converts wired Modbus devices such as energy meters and sensors to LoRa long range wireless. Any device with a wired Modbus RS485 interface can be read. Modbus register values are transmitted to the cloud, or remote Modbus IP server, using long range LoRa wireless where the device data can be displayed and analysed.
Learn more
Sound Sensor
The Elsys ERS Sound sensor is a LoRaWAN room sensor that measures indoor environment. ERS sound is enclosed in a room sensor box and is designed to be wall mounted. Inside the ERS you will find five internal sensors: Temperature sensor, humidity sensor, light sensor, Sound level sensor (peak and average) and a motion sensor (PIR). ERS sound is powered by two 3,6V AA lithium battery(ER14505).
Learn more
LoRa Spy T1
The JRI LoRa Spy T1 is a temperature sensor with range of -30C to 70C and has an accuracy of 0.2 degrees. With an IP68 rating, this sensor is completely waterproof and safe to use in dishwashers. Other key features include: food safety certified and an LED screen.
Learn more
Activity Detection Sensor
It detects the sudden movement or vibration of the device and send an alarm signal to the gateway for processing. It uses the SX1276 wireless communication module.
Learn more
Industrial GPS Asset Tracker
The Industrial GPS Asset Tracker is an ideal solution for geolocalizing your assets in the field. This device provides GPS enabled near real-time satellite location tracking with LoRaWAN®. The rugged IP67 design allows for operation in diverse deployment environments, with an operable temperature range of -40°C to +85°C and an optional BLE integration. The unit is equipped with an accelerometer to accommodate event-based start-up, minimizing unnecessary battery usage.
Learn more
Accelerometer No Stop Message
The wireless acceleration-based movement sensor uses an internal accelerometer to detect movement of an asset. When motion is detected that exceeds a certain threshold, an alert is sent over the wireless network. Versions of the sensor support the major LPWAN standards such as Sigfox, LoRa/LoRaWAN, and SubGig.
Learn more
Wireless 3-phase current meter (R718N315)
The R718N315 is a three-phase current sensing device for Netvox Class A type devices based on the LoRaWAN open protocol and is compatible with the LoRaWAN protocol. It can check the AC three-phase current according to reporting time configuration.
Learn more
GPS Tracker
LW001-BG is a wireless smart and ultra-low power consumption LoRaWAN GPS Tracker. Which is based on standard LoRaWAN protocol that is suitable for long distance transmission,and built-in GPS & 9-Axis motion tracking sensor. Ideal to optimize logistic process, asset management, warehouse and inventory scenarios, outdoor tracking, theft protection and much more. In a definable interval, LW001-BG automatically reports its longitude, latitude, speed, and battery level.
Learn more
Rondio Digital Log Sheet
Reassure users by informing them of the latest cleanings carried out. We have created our solutions in partnership with cleaning companies operating in sectors as varied as hospitals, food processing and cosmetics, where hygiene and monitoring rules are the strictest and the most demanding.
Learn more
Pulse Meter
The Adeunis PULSE Sensor can have up to 2 different meters and can be locally and remotely configured. It can detect any tampering and leaks with flow rate monitoring. Data logging is used for optimal autonomy and redundancy for better service continuity. (does not include cable wires)
Learn more
7200 LPWAN Tracker
The RAK7200 is a GPS tracker with LoRaWAN functionality. It comes with an Li-Ion battery inside the casing. This LoRa node is perfect for IoT applications such as asset tracking, smart vehicle management and location-based services. With the RAK7200 you get a fully functioning GPS tracker, with low power consumption and the great range that LoRa provides.
Learn more
Analog or Digital Sensor (Pulse)
The device DL-DLR2 is a multi-purpose LoRaWAN® sensor reader and transmitter manufactured by Decentlab. It can be configured by the manufacturer for a variety of sensor models. For example, DLDLR2 can be configured to read a pressure sensor through the integrated RS-485 interface; or a temperature / humidity sensor through the integrated I2C interface; or an ultrasonic rangefinder through the integrated serial (UART) interface. It can also be configured to read analog voltage or current signals (0 … 3 V, 4 … 20 mA, etc.).
Learn more
ERS Lite Indoor Environment Sensor
This is an indoor LoRaWAN® room sensor for measuring the indoor environment. ERS Lite is enclosed in a minimalist and discrete box that fits in any application. Mount it on a wall or any other flat surface and have full control over the temperature and humidity.
Learn more
PM2.5
The LS-113G series are designed to measure Particle, Temperature and Humidity. It is perfect to detect the dust in the air, like air purifier, air conditioner and air monitor.
Learn more
BLE Asset Tracker
The BLE Asset Tracker is an ideal solution for locating, tracking and managing assets in difficult RF environments such as hospitals and medical facilities. This device combines the long range, low power benefits of LoRaWAN® with the universal availability and reliability of Bluetooth Low Energy (BLE). The unit is equipped with an accelerometer to accommodate event-based start-up, minimizing unnecessary battery usage.
Learn more
LoRaWAN Smart Badge
The Abeeway Smart Badge is a portable muti-mode tracker in ID card format with embedded sensors combining GPS, Wi-Fi Sniffer, BLE and LoRaWAN TDoA geolocation technologies, supporting accurate and continous outdoor and indoor geolocation.
Learn more
Indoor Window and Door Sensor NL Compatibility
When the door or window is opened, this sensor sends an alarm message. It utilizes the latest ultra-low power consumption technology and requires no wiring. It requires just button batteries to support its operation. This sensor is compatible with the NighLock door barricade hardware (sold separately).
Learn more
enLink Status-AF Air Velocity Sensor
enLink Status-AF measures air velocity in the range of 0 to 40m/s with industry leading accuracy of 0.1%. This sensor can be used to ensure that recommended air flow rates for public buildings and industrial plants are achieved. Air velocity data is transmitted using long range LoRa wireless for integration with cloud services or onsite systems via Modbus IP to reveal operational performance and generate alerts.
Learn more
Ultrasonic Distance/Level Sensor (0.3~5m)
EM500-UDL ultrasonic level sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It can measure the distance to a wide range of objects by using ultrasonic sound waves and provides highly accurate continuous level measurement of most liquid material.
Learn more
LoRa Spy T0
The LoRa SPY T0 recorder measures and records temperature. Robust and waterproof, it is is designed for cold chain monitoring during transportation and is compliant with the EN 12 830 standard. This IP68 sensor can be used in dishwashers. Totally water proof. Temperature range -35C to 85C. Also has food safe certificate.
Learn more
IP65 Temperature and Humidity Sensor
UC11-T1 is a smart wireless module, featuring LoRaWAN protocol, equipped with a high-precision temperature and relative humidity sensor. This sensor can measure temperatures from -40C to+ 70C, as well as air humidity from 0 to 100%. The sensor is optimized for long battery life and excellent RF performance. It is fully configurable over the air by the user for custom applications, thresholds, trigger events and reports.
Learn more
Soil Moisture and Temperature Profile Sensor
Sensor data are transmitted in real-time using LoRaWAN® radio technology. LoRaWAN® enables encrypted radio transmissions over long distances while consuming very little power. Subsurface probe measures soil moisture and temperature at 6 levels of depth: 100, 200, 300, 400, 500, 600 mm depth.
Learn more
enLink Status-DP LoRa Wireless Differential Pressure Sensor
enLink Status-DP uses long range LoRa wireless to measure and send differential pressure readings for up to 16km. Long life battery power enables simple, low cost installation for a variety of applications. Unique Multi-Range pressure sensor has up to 7 calibrated ranges for unrivalled dynamic range, with the benefit that a single Status-DP unit can cover the full pressure requirements
Learn more
Submersible Water Level Sensor (10m)
EM500-SWL level sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It is designed to provide convenience of direct submergence in liquids for up to 200m reliable level measurement.
Learn more
NH3 + Temp/Hum + Air Pressure
This Polysense device utilizes an NH3, Temperature and Humidity, and Air Pressure sensors. It has a durable IP67 enclosure.
Learn more
Asset Management Tracker
Asset Management Tracker
Learn more
Panic Button
The new MY-501H Panic Button from GlobalSat has a front facing panic button with no other buttons. The GlobalSat Panic Button is specifically designed for both indoor and outdoor location tracking using both BLE and GPS technology. It is compact, light, and easy to use. The device is also equipped with the rechargeable battery to provide basic power usage.
Learn more
Air Temperature and Humidity
The air temp and humidity sensor uses air flow to measure temperature and humidity levels. If the temperature and/or humidity rises above or falls below the configured thresholds, an alert is sent over the wireless network. Versions of the sensor support the major LPWAN standards such as Sigfox, LoRa/LoRaWAN, and SubGig.
Learn more
ModBus
The Wzzard LRPv2 LoRaWAN node intelligent sensor platform enables you to quickly and easily create a complete connectivity stack between your sensors and applications via a network or the Internet. The platform uses intelligent edge nodes and a wireless LoRaWAN network to transmit analog or digital signals or Modbus RTU sensor data to a WISE-6610 LoRaWAN gateway or other LoRaWAN-compliant gateway device. The Wzzard node can accommodate virtually any industry standard external sensors.
Learn more
Guppy Compact GPS Tracker
Tiny, lightweight and ultra-rugged battery-powered LoRaWAN geolocation tag for affordable indoor and outdoor asset monitoring Powered by 2 x AAA Batteries with up to 5 years battery life Weatherproof and ultra-rugged IP67 Housing with compact and ergonomic design Accelerometer for Smart Movement Based Tracking and Tilt Detection
Learn more
CO2 Sensor
The CO2 sensor collects and preprocesses CO2 in its environment, transmits the information to a central coordinator and controls and calibrates all elements of the sensor.
Learn more
Sound Sensor
The Polysense WxS 880-004 sound sensor can be used for: Industrial environmental noise collection, Smart city noise collection, Animal husbandry wearable accessories, Smart Home Sensor Hub/Cluster, Internet of Things Acoustic Sensor Node, Digital camera/camcorder, and Game console/controller.
Learn more
Pressure Sensor
The R720C is a wireless communication device that detects ambient air pressure and temperature. The R720C detects ambient air pressure and temperature and transmits the detected data to other devices
Learn more
Motion Sensor
Skysens SkyMot1 is a smart device with multiple purposes capable of detecting motion with an internal accelerometer with high resolution. With special firmware upgrade device can report accelerometer measurement in every second and report minimum, maximum and average of all 3 axises every minute or shorter for predictive maintenance applications. It can also measure working time of the machinery and the orientation. For Special Firmware Upgrade Please Contact Skysens After Purchase.
Learn more
Air Quality Monitoring
Create an optimal school or work environment with indoor air quality monitoring. Protect student and employee health and meet indoor air quality regulations.
Learn more
Temp/HUM + PT100
This Polysense device is a temperature and humidity sensor that utilizes a PT100 module. It has a durable IP67 enclosure.
Learn more
Push Button
Ascoel are industrial push button sensors available for indoor applications. Three different operational modes are available in order to transmit to the server the information when the button is pushed or the number of how many times the button has been pushed also in a programmable time period. Low battery consumption.
Learn more
CO Sensor
The LS-112P is designed to measure Carbon Monoxide (CO) and Temperature/Humidity. It is perfect for monitoring air quality in basement parking, garage, gas ranges/ovens and furnaces.
Learn more
Power Meter Reader
Skysens SkyEnr1 is a cost-effective, easy-to-use electrical meter reading device for remote energy monitoring
Learn more
LoRa Spy Reference Standard Measuring Instrument
A reference device designed to perform calibrations of connected loggers in the LoRa® SPY range, the LoRa® SPY Reference recorder measures and records temperature with high precision. With a PT100 stainless steel probe, Cl.A, Ø3x20 mm, 3m teflon cable Ø2,9mm (-196° +150°C). Its metrological specificities allow it to be perfectly adapted to the monitoring of equipment with very limited temperature ranges.
Learn more
EMS Door Sensor
This is an indoor LoRaWAN® opening activity sensor that will tell you when an object has been opened or moved. It is a subtle and minimalistic sensor and the size is ideal for mounting on door frames, window panes, cabinets, and much more.
Learn more
Push Button
The single push button sensor can be used as a panic button, personal emergency response (PERS), remote control, or other remote push button applications. When the button is pressed, an alert is sent to the wireless network. Versions of the sensor support the major LPWAN standards such as Sigfox, LoRa/LoRaWAN, and NBIoT.
Learn more
Pressure/Liquid Level and Temperature Sensor w/ G1/4" Pip...
The device DL-PR26 enables remote monitoring of water level in open water, fill level of tanks, groundwater level and various other applications. It measures the pressure at the sensor head relative to the pressure at the cable end (device enclosure). When the sensor head is placed under water (or any other liquid), the relative pressure indicates the depth of the sensor head. In water, the relative pressure of 1 bar equals to a depth of approximately 10 m. The device also records the temperature of the sensor head. The temperature reading is used for temperature compensation.
Learn more
Pressure/Liquid Level and Temperature Sensor
The device DL-PR26 enables remote monitoring of water level in open water, fill level of tanks, groundwater level and various other applications. It measures the pressure at the sensor head relative to the pressure at the cable end (device enclosure). When the sensor head is placed under water (or any other liquid), the relative pressure indicates the depth of the sensor head. In water, the relative pressure of 1 bar equals to a depth of approximately 10 m. The device also records the temperature of the sensor head. The temperature reading is used for temperature compensation.
Learn more
Clickey Occupation Sensor
The Clickey Occupation Sensor monitors and measures the occupation of flexible workplaces, meeting facilities and sanitary rooms. A convenient application within a smart building concept.
Learn more
LDS01 Door Sensor
The Dragino LDS01 is a LoRaWAN Door Sensor. It detects door open/close status and uplink to LoRaWAN network. LDS01 is powered by a CR2032 coin battery, in a good LoRaWAN Network Coverage case, it can transmit as many as 12,000 uplink packets (base on SF7, 14dB). in poor LoRaWAN network coverage, it can transmit ~ 1,300 uplink packets (base on SF10, 18dB). The design goal for one battery is up to 1 year. User can easily change the CR2032 battery for reuse.
Learn more
Water Meter DN20
Ultrasonic water meter QALCOSONIC W1 is designed for accurate measurement of cold and hot water consumption in households, apartment buildings and small commercial premises.
Learn more
AC Switch
The Smart AC Switch is an ideal solution for Smart Home and Office automation. The switch gives users the ability to monitor and report on energy consumption and utilization including line voltage reporting as well as load, current, power and power factor reports. The switch is designed to wirelessly communicate via LoRaWAN which allows for seamless integration into your network. Users will experience cost savings from improved power consumption practices and enhanced home and office safety and security.
Learn more
Water Rope (Enhanced)
The Netvox Water Rope can run up to 300m and uses a water detection wire to determine any if there any leaks present. The device sends the leak message within 10 seconds of detection.
Learn more
LS-111P CO2 Sensor
LS-111P is designed to measure Carbon Dioxide (CO2) and Temperature/Humidity. It is perfect for monitoring air quality in schools, office buildings, greenhouses, factories, hotels, hospitals, transportation lines and anywhere high levels of carbon dioxide are generated.
Learn more
Infrared Body Temperature Sensor
This device is an intelligent touch-free infrared body temperature screener that uses a 30cm proximity sensor for detection.
Learn more
High-precision Pressure/Liquid Level, Temperature And Ele...
The device DL-PR36CTD enables remote monitoring of water level, temperature and electrical conductivity with high precision. Applications are water quality monitoring in open water, fill level of tanks, groundwater quality and level and various other applications. It measures the pressure at the sensor head relative to the pressure at the cable end (device enclosure).
Learn more
Activity Timer
The device detects the duration of the movement or vibration (timekeeping) and sends the duration or timing information of the movement or vibration to the gateway for processing. The duration of the movement or vibration can be up to 1000 hours (theoretical value).
Learn more
Liquid Level Sensor
RA0711 carrying communication interface which could be connected to external water level sensor (RS485), is mainly used for liquid depth detection.
Learn more
Outdoor CO2 Sensor
Decentlab’s outdoor-ready air quality monitor continuously measures carbon dioxide (CO2) concentration, temperature, humidity and barometric pressure. This device periodically performs an automatic calibration routine for the CO2 sensor. The calibration routine requires no interaction by the user.
Learn more
Tilt Sensor
The tilt sensor uses an accelerometer to detect transitions between horizontal and vertical orientation, as well as reporting the angle of tilt. When the sensor is rotated from horizontal to vertical or visa versa, an alert is sent to the wireless network. Versions of the sensor support the major LPWAN standards such as Sigfox, LoRa/LoRaWAN, and SubGig.
Learn more
LoRA Remote I/O Controller
Ursalink UC1114 is designed as a cost-effective industrial machine monitoring device that monitors and controls up to 2 dry contacts and 2 drivable relay outputs. Embedded with multiple trigger conditions and actions, Ursalink UC1114 allows users to create various combinations of commands accordingly. Coupled with Ursalink UG87 LoRaWAN gateway, Ursalink UC1114 enables users to fastly build up a LoRa-Baesd IoT solution for monitoring and control of remote devices without traveling on site back and forth.
Learn more
4-20mA Current Loop Sensor
The 4-20mA sensor uses a 10-bit ADC to measure an analog value between 4 and 20mA with a 10uA resolution. If the measured value rises above or falls below the configured thresholds, an alert is sent over the wireless network. The Armored Sensor™ IP67 weather-proof enclosure makes the sensor suitable for outdoor and industrial use.
Learn more
Waste Bin Sensor
Distance sensor capable of measuring virtually any object within accuracy of up to 4-meters away, the KST33 Series is an ideal sensor choice for a variety of Internet-of-Things applications.
Learn more
PlacePod Surface-mounted Vehicle Detection
PlacePod is an IoT-enabled smart parking sensor for on-street and off-street public and private parking management. PlacePod solves the most mission-critical aspects of parking management: accurate, real-time vehicle detection and the location of available parking spaces. The PlacePod sensor is a LPWAN-compatible vehicle detection device. It is built with PNI’s high-performance magnetic sensor and vehicle detection algorithms that accurately detect the presence or absence of a vehicle in a parking space. Each sensor has a unique ID for easy provisioning, tracking and management.
Learn more
Temperature and Humidity Sensor for Low Temperature Envir...
R718A, mainly used to detect the temperature and humidity at low temperature environment such as the freezer air. It collects data over LoRa network and sends it to devices to be shown, fully compatible with LoRa protocol.
Learn more
Ethernet Gateway
Gemtek Femto Gateway (Ethernet) uses LoRaWAN technology to connect low-cost, battery-operated sensors over long distances in harsh environments that were previously too challenging or cost-prohibitive to connect. With its long range, high penetration and high sensitivity capabilities, it is a much more cost effective way to remotely monitor and control.
Learn more
LoRa converter for Analog sensors
Press’O is a LoRaWANTM Class A sensor transforming any gauge type of 0-10V, 4-20mA analog sensor into a remote wireless sensor that monitors, controls and radio transmit any fluid level (water, oil, gas…).
Learn more
Distance Detection Sensor
The Dragino LDDS75 is a LoRaWAN Distance Detection Sensor for Internet of Things solution. It is used to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
Learn more
CO Sensor
The CO sensors accurately detects the presence of gas in closed space. This device has a durable IP67 enclosure.
Learn more
Motion Sensor
Optimize the comfort and energy consumption of a building. Functions: presence, luminosity, alert button, dry contact input. A design for a product adaptable to any type of environment
Learn more
Occupancy, Temperature and Light Sensor
Netvox’s wireless occupancy, temperature and light sensor reports temperature and illumination status values over the LoRaWAN network at pre-arranged intervals. In addition to this the infrared occupancy sensor will alert to real-time movement once the sensor is triggered to report occupied status of the area.
Learn more
Tracker Node with Solar Panel
The RAK7205 LPWAN tracker board is built upon the RAK811. At its core is an STM32L1 microcontroller driving Semtech® SX1276/78 LoRa® chip. GPS is present as well as a number of sensors. The aforementioned makes the board suitable for rapid application development, such as asset tracking, vehicle management, location-based services, environmental monitoring, etc. Additionally, because of its low power consumption in sleep mode, it can provide a long-lasting solution for any battery-powered project.
Learn more
Occupancy & People Counting
The Connected Tracking Solution Smart technology for real-time visibility of occupancy and space utilization.
Learn more
Metering/Industrial Bridge Sensor
Skysens SkyInd1 Industrial LoRaWAN bridge family is easy-to-use plug and play signal bridge family for multiple industrial applications. They provide easy access to industrial machinery monitoring for Industry 4.0 applications.
Learn more
Environmental Sensor
This IP67 battery powered sensor reads temperature, humidity and pressure and sends collected data over the LoRaWAN™ network. Ideally suited for a wide range of applications such as weather stations, urban monitoring, air quality, industrial, environmental or farming projects.
Learn more
Healthy Home: Temperature, Humidity, Air Quality Sensor
The Tabs Healthy Home sensor utilizes LoRaWAN connectivity to communicate the Temperature, Relative Humidity and Volatile Organic Compound levels of the surrounding environment. The intended use is to place the sensor within a room to determine if the air quality, temperature, and humidity are ideal.
Learn more
Desk Presence Sensor
The Elsys ERS Desk is a LoRaWAN sensor for measuring desk occupancy. ERS Desk is designed to mount under the desk and senses when somebody is using the desk (standing/sitting).It can be used for dynamic workplace management, facility management and workplace statistics. The sensor also measures temperature humidity and light. ERS Desk is powered by two 3,6V AA lithium battery.
Learn more
High-Precision Pressure/Liquid Level and Temperature Senso
The device DL-PR36 enables remote monitoring of water level in open water, fill level of tanks, groundwater level and various other applications. It measures the pressure at the sensor head relative to the pressure at the cable end (device enclosure). When the sensor head is placed under water (or any other liquid), the relative pressure indicates the depth of the sensor head.
Learn more
Industrial Tracker
The Abeeway Industrial Tracker is a highly versatile multi-mode tracker with a large battery and embedded sensors combining GPS, Low-power GPS, Wi-FI Sniffer and LoRaWAN TDoA geolocation technologies, supporting accurate outdoor and indoor geolocation. This tracker is designed to resist harsh surroundings enabling you to perform seamless asset tracking, proximity detection, and management in any industrial environment.
Learn more
Analog Transmitter 4-20mA Interface
This LoRa/LoRaWAN 4/20mA analogue radio transmitter is specifically designed for industrial applications (construction industry–water management–rail industry, etc.). Self-powered, it connects to all types of analogue probes with 4/20mA interface and reassemble the signal. This transmitter can meet all types of applications including pressure, flow, fluid levels (water, fuel oil, gas, etc.) / gauges (ultrasonic probes), etc. The robustness of our LoRa / LoRaWAN transmitter – IP 65 enclosure – and its high environmental tolerance (-20°C/+55°C) allow it to withstand any type of environment.
Learn more
Platinum Extreme Sensor
Lansitec precision platinum temperature sensor is designed based on the advanced LoRa modulation and powered by lithium battery with 6-year operation time. It is cost-effective LoRaWAN end device for a variety of application scenarios. Its long operation time offers low maintenance. Therefore, it is ideal for industrial use. Sensor work mode can be adjusted via LoRa network. Lansitec sensor family is fully compatible and plug-and-play for LoRaWAN network operation.
Learn more
IP55 Pulse Based Smart Meter
The Class A LoRaWANTM PULSE SENS’O from nke Watteco is a long range, low power consumption, high performance and high quality wireless up or down pulse sensor transmitting data from water, gas, electricity & energy meters.
Learn more
Temperature Probe (exp)
Dragino Temperature Probe (exp)
Learn more
Parking Lot Sensor
The Parking Lot Sensor detects and reports parking space occupancy, thus enabling active parking lot management features, such as search, navigation and reservation. The easy retrofit sensor solution for off-street parking is installed in minutes.
Learn more
Temperature and Humidity Sensor
DecentLab Air Temperature and Humidity Sensor with 2m cable. Applications include: outdoor remote monitoring, smart agriculture, urban heat islands, greenhouses, frost alarming, building automation, cold chain and storage.
Learn more
Displacement Sensor
This Polysense device is a displacement sensor that use long-life conductive plastic material. The displacement range for this device is 50mm, and an accuracy of 0.01mm. Used for long-term monitoring and recording of cracks at high altitudes and locations that are not easily accessible to structures.
Learn more
Desk Occupancy Sensor
Attaches under desks to monitor desk usage in any office setting.
Learn more
EM500-CO2 Sensor
EM500-CO2 sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It integrates CO2, barometric pressure, temperature and humidity sensors, which suits outdoor environment monitoring applications.
Learn more
Contact Tracing Wearable Panic Button
LW004-CT is a LoRaWAN-Based network IoT button specifically designed for contact tracing purposes. It is compact, small in size and easy to use. It can be used to track close contact and safe social distance reminders. With a panic button can be used for SOS function or user-defined the panic event. All of the close contact information will be obtained by scanning the incoming data from nearby BLE beacons or LW004-CT. And it will send these data to the nearest LoRaWAN gateway.
Learn more
Modbus
The Dragino RS485-LN is a RS485 to LoRaWAN Converter. It converts the RS485 signal into LoRaWAN wireless signal which simplify the IoT installation and reduce the installation/maintaining cost. RS485-LN allows the user to monitor / control RS485 devices and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, etc.
Learn more
enLink Pulse Counter
enLink Pulse counts meter pulses on up to four channels and transmits the accumulated data to the cloud using long range LoRa wireless where it can be displayed and analysed. Battery powered and with one-click configuration, enLink Pulse is the easiest, fastest way to access your energy data in real time.
Learn more
1-phase current meter
R718N115 is a current detection device of Netvox Class A type equipment based on LoRaWAN open protocol. It measures single-phase current through external current transformer.
Learn more
Custos BVS Valve
The valve is a Class-C device. Easy snap-on to fit onto existing water valves to control the opening and closing of the valve. An add-on lipstick sized water leak detector with additional probe that can detect water leak
Learn more
Air Pressure Delta Sensor
Monitoring the operation of a ventilation box, air handling unit or air network of a building using pressure difference relative to the atmospheric pressure or between two different zones. It has 2 digital inputs/outputs for connecting to a PLC for tracing alerts or operating states, and 1 analogue input 0-10V for connecting to a sensor.
Learn more
People Counter
This is a DC-powered bidirectional people counter to count foot traffic in shopping malls, on trade show floors etc.
Learn more
PIR Motion / Desk Occupancy Sensor
The Tabs PIR & Occupancy sensor detects occupancy or motion in homes or buildings for security purposes. The sensor can also be utilized in facility management systems to optimize facility usage or cleanliness for desks, conference rooms, bathrooms, etc.
Learn more
Panic Buttons
Help at the push of a button
Learn more
Legacy Soil Moisture, Temperature Sensor
LoRaWAN®-enabled soil moisture sensor including temperature sensor. Volumetric water content (VWC) measurement with high volume of influence: 715 mL.
Learn more
Temperature and Humidity Sensor with Radiation Shield
DecentLab Air Temperature and Humidity Sensor with Radiation Shield. Applications include: outdoor remote monitoring, smart agriculture, urban heat islands, greenhouses, frost alarming, building automation, cold chain and storage.
Learn more
Get started today.
To learn more about our solutions, call (281) 667-0404, or request an online meeting.